A car enthusiast forum based in the Philippines with over two decades of intelligent discussions about cars, driving, in-car entertainment, motorsports, off-roading, and motoring life.

News:

Welcome to the AutoIndustriya.com Car Discussion Forums!

Main Menu

Question re: new painted car...what to check?

Started by smewth, January 04, 2010, 05:35:50 PM

Previous topic - Next topic

smewth

pano po ba chinecheck yung quality ng pag ka paint ng kotse?what do i need to check or observe?hingi naman po advice/tips kasi soon lalabas na kotse ko from the paint shop gusto ko lang malaman mga dapat tingnan bago ilabas sa shop :) thanks!
Tricked Out Autoworx
custom paint and bodyworks
0916-620-1901
901-7630
http://trickedoutautoworx.tk

bulilit

IMO and in my "small" experience, look from the side. para makita mo kung meron prob like dents, alon or any roughness that should have been taken care.

Check also the paint in the roof and look from the top and side in checking.

Check also kung meron "daya" like application of wax. Bring a bottled water and poor it on. If it creates a beeding effect or sheets out the water, then possible na merong "wax". Meaning kung meron wax (that should not be applied in a freshly painted car), possible na meron silang tinatago.

Feel it. Use your hand and wipe it slowly. It should be smooth.

And Last, examine carefully yung pagkakapantay pantay ng kulay ng pintura.

I hope this helps.

bulilit


raul tuason

sir, lalabas lang ang problema after 1 month pag ginamitan ng substandard primer,watch for sanding marks , blister , mapa ,fading , discoloration and loss of gloss, anong primer ba ang ginamit

smewth

Quote from: raul tuason on January 05, 2010, 02:37:11 PM
sir, lalabas lang ang problema after 1 month pag ginamitan ng substandard primer,watch for sanding marks , blister , mapa ,fading , discoloration and loss of gloss, anong primer ba ang ginamit


WEBER po yung pangalang nung product na ginamit for primer
Tricked Out Autoworx
custom paint and bodyworks
0916-620-1901
901-7630
http://trickedoutautoworx.tk

raul tuason

#4
sorry pare, malamang magkaproblema ka ,it is one of the cheapest

Post Merge: January 05, 2010, 09:49:08 PM

madaming shop talaga gumagawa na gagamit ng top of the line na top/ clear coat  para pag kuwa mo ng car mo bilib ka sa kintab but ang primer na hindi mo kita ,cheapest ang gagamitin,the paint job is only good as its weakest link

majorguile

Nice topic eto. tamang tama I also have my car painted on one reputable shop... syempre first time ko magpa paint so gusto ko rin malaman kung pano ko i-inspect ng mabuti. hehehe

iBONAFIDE

#6
what's the problem to WEBER kung siya ang cheapest. Subon na namin brand na yun, walang problema. Nasa pintor ganda ng finish product!

raul tuason

if you want to use local brand use nippon nax at least may color formula/documentatiom

majorguile

hi guys, sorry to butt in... ok ba yung glassurit body filler? yan kasi ang nilagay sa car ko. TIA

iBONAFIDE

Like i'm always insinuating. Nasa pintor ang ganda ng finish product. I'm sure auto painters know their "tools & materials". IMHO, plus factor na lang ang ganda o mahal ng materyales but not a major factor.. Peace!

Jay Leno

#10
Quote from: iBONAFIDE on February 07, 2010, 01:36:28 AM
Like i'm always insinuating. Nasa pintor ang ganda ng finish product. I'm sure auto painters know their "tools & materials". IMHO, plus factor na lang ang ganda o mahal ng materyales but not a major factor.. Peace!

seems like you know so much... you post like you're the only one who knows how to paint. whats your painting experience anyway?

iBONAFIDE

#11
That's why I highlight the IMHO!!! :angry2:  Kindly read it again! Don't put MALICE on my post. PLEASE!!! Salamat po!!!  :asian:

majorguile

Hehehe natawa naman ako sa inyo.  I think depende nga sa pintor yung magiging outcome pero syempre meron ding effect kung panget yung ginamit na material. Parang kapag nagpagawa ka ng bahay... kahit magaling yung gumagawa kung sub standard naman ginamit edi madali rin masira and thats something na hindi kayang i-control nung gagawa although I'm not saying na yung WEBER is sub standard. Pero this is my opinion lamang. HEHEHE. Peace!

iBONAFIDE

Quote from: majorguile on February 07, 2010, 02:37:55 PM
Hehehe natawa naman ako sa inyo.  I think depende nga sa pintor yung magiging outcome pero syempre meron ding effect kung panget yung ginamit na material. Parang kapag nagpagawa ka ng bahay... kahit magaling yung gumagawa kung sub standard naman ginamit edi madali rin masira and thats something na hindi kayang i-control nung gagawa although I'm not saying na yung WEBER is sub standard. Pero this is my opinion lamang. HEHEHE. Peace!


I feel you you kapatid! Gusto ko lang naman iparating sa mga newbie na malaking factor din ang pintor, hindi lang yung materiales. Kung hindi magaling pintor pero maganda materyales hindi rin satisfactory ang finish product. And like i've said on my post, it's my own opinion & experience. Period! Peace din bro.!!!  :cheer: